This information would be useful for those persons who need any facts about Dynamic Disk Recovery. The utilization of built-in Raid controller can demand the Raid array recovery. Let us look at the example. Imagine that you've equipped AMD SB 600 embedded chip set controller with a Raid array on it. It acted without any difficulties and you're glad, but then there came moment to refresh your aged hardware. Of course you should have decided to select Intel Core CPU. You have settled what motherboard to choose and you see there an embedded ICH9R controller, you have replaced your hard drive, but Raid array still can't be determined. There're 2 ways out:
1. There's a method of receiving new hard drives and making a new Raid array on them. In this case you will have to transfer the old data to new hard drives and spend a lot of time to recover previous Raid array.
2. And you can choose to turn to some “file restoration laboratory” where the specialists would restore your Raid array for some money and during the little period of time. Or you can utilize professional Raid restoration software. And in the case when an individual utilize external Raid array the problem will disappear by itself. It occurs so because it's required only to transfer a controller with hard disk drives. One more problem is that the embedded Raid controllers that are accessible in the market, are semi-hardware. The only Raid arrays that can be restored by these controllers are 1, 0+1, 5 and they cannot use another methods of recovery.
“Mirroring” as 1 of the ways that will assure safety to you. There's a conviction that the utilization of stripe (Raid 0) deprives persons of data restoration and persons who do not utilize it are strictly secured from the Raid arrays restoration. But there're cases when no “mirroring” will assist you because there are a lot of difficulties as virus assaults, driver difficulties in the OS and electricity failures. But what is the settlement of this type of difficulty then? You can only restore the data from Raid array or recover the Raid array in whole. You are to switch off your computer and bring a system unit to a data restoration specialist. Only doing these steps you will get an ability to save and restore your data from Raid arrays. (more…)